">Brand | "> Ebyte | "> IC | "> nRF24L01P |
"> Model | "> E01-ML01DP5 | "> Interface | "> SPI |
"> Power | "> 20dBm | "> Distance | "> 2000m |
"> RF connector | "> SMA-K | "> Frequency | "> 2400MHz (2400-2525MHz) |
">E01-ML01DP5 is the iconic product of EBYTE. This nRF24L01+PA+LNA RF module operates at 2.4 GHz, with SPI interface and stable production, which make the module suitable for various applications. |
">General parameters | ||
"> Antenna type | "> SMA-K | "> 50Ω characteristic impedance |
"> Operating temperature | "> -40 ~ +85℃ | "> – |
"> Operating humidity | "> 10% ~ 90% | "> Relative humidity,No condensation |
"> Storage temperature | "> -40 ~ +125℃ | "> – |
"> Size | "> 14.5 * 18.0 mm | "> – |
"> Weight | "> 4.9g | "> Average weight |
"> Connector | 2*4*2.54 mm | Plug-in |
Operation Range | About 2000m | Test condition: clear and open area& 20dBm, antenna gain:5dBi, height: 2m, air data rate: 250kbps |
Communication interface | SPI | Data rate: up to 10Mbps |
Transmitting length | 3 level FIFO | 32 bytes (maximum) for one package |
Receiving length | 3 level FIFO | 32 bytes (maximum) for one package |
Electrical parameters | ||
Frequency Band | 2400 – 2525 MHz | Adjustable |
Supply voltage | 2.0 – 3.6 V DC | Notes: the voltage higher than 3.6V is forbidden |
Communication Voltage | 0.7VCC – 3.6 V DC
| VCC refers to the supply voltage |
Transmitting power | 20dBm | 100mW |
Air data rate | 250kbps – 2Mbps | 250kbps, 1Mbps, 2Mbps |
Standby current | 1.0uA | nRF24L01P sets as power-down, CE low level |
Transmitting current | 130mA@20dBm | ≥300mA |
Receiving current | 21mA | CE=1 |
Sensitivity
| -106dBm/250kbps | Please see more in IC datasheet |