Specifications - 7-inch TFT-LCD - Screen Resolution: 800x480 pixels - 5 finger capacitive touch input - Power consumption : 600mA/5Volt - Backlight on/off slide switch - Viewing angle (in degree) : Left 70, Right 70, Up 70, Down 50 - Screen Dimensions : 172.9 x 124.3 x 15 mm Including switch and connectors) - Viewable screen size : 153.6 x 86.64 mm (active area) |
Package include A. Fully assembled 7inch TFT LCD + 5 point multi touch screen B. 6 x 3.5mm screws C. 3 x Hex nuts D. Micro USB link board E. HDMI link board F. Micro-to-TypeA USB Cable (approx. 35cm) G. Micro-to-Micro USB Cable (approx. 35cm) H. TypeA-to-TypeA HDMI cable (approx. 35cm) |
with ODROID-C1+ | with ODROID-C1 |
ODROID-C1 / C1+ Touchscreen drivers are available with support for 5 touch points, and proper drivers are integrated in the latest Ubuntu and Android OS images. Screen resolution must be configured to WVGA (800x400) and the DVI option should be enabled on the “vout” parameter by editing the boot.ini file, as shown in the below. To use the VU7 on C1/+ Linux system, the Kernel version must be 3.10.80-128 or higher (sudo apt-get update & sudo apt-get dist-upgrade). Also, don’t forget to configure the boot.ini file like this for 800x480 resolution and DVI output mode: Configuration for C1/C1+ (Edit boot.ini file) # Possible screen resolutions # Uncomment only a single Line! The line with setenv written. # At least one mode must be selected.
| ODROID-XU4/3 HDMI timing generator in the Exynos platform is not flexible. So we can't make 800x480 60Hz standard display frequency. So we tweaked the HDMI driver code to support the 800x480 resolution with slightly reduced frequency at 54Hz. To use the VU7 on XU4 Linux system, you must update the kernel 3.10.92-63 or higher (sudo apt-get update && sudo apt-get dist-upgrade). Also, don’t forget to configure the boot.ini file like this for 800x480 resolution and DVI output mode: Configuration for XU4/3 (Edit boot.ini file) # --- Screen Configuration for HDMI --- # # --------------------------------------- # Uncomment only ONE line! Leave all commented for automatic selection. # Uncomment only the setenv line! # --------------------------------------- # ODROID-VU forced resolution # setenv videoconfig "video=HDMI-A-1:1280x800@60" # ----------------------------------------------- # ODROID-VU forced EDID # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x800.bin" # ----------------------------------------------- # 1920x1080 (1080P) with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1920x1080@60" # ----------------------------------------------- # 1920x1080 (1080P) without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080.bin" # ----------------------------------------------- # 1920x1080 50hz (1080P) with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1920x1080@50" # ----------------------------------------------- # 1920x1080 50hz (1080P) without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1920x1080_50hz.bin" # ----------------------------------------------- # 1440x900 with monitor provided EDID information. # setenv videoconfig "video=HDMI-A-1:1440x900@60" # ----------------------------------------------- # 1440x900 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1440x900.bin" # ----------------------------------------------- # 1280x720 (720P) with monitor provided EDID information. (720p-edid) # setenv videoconfig "video=HDMI-A-1:1280x720@60" # ----------------------------------------------- # 1280x720 (720P) without monitor data using generic information (720p-noedid) # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1280x720.bin" # ----------------------------------------------- # 1024x768 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/1024x768.bin" # ----------------------------------------------- # 800x600 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x600.bin" # ----------------------------------------------- # 800x480 without monitor data using generic information (ODROID 7") setenv videoconfig "drm_kms_helper.edid_firmware=edid/800x480.bin" # ----------------------------------------------- # 720x576 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x576.bin" # ----------------------------------------------- # 720x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/720x480.bin" # ----------------------------------------------- # 640x480 without monitor data using generic information # setenv videoconfig "drm_kms_helper.edid_firmware=edid/640x480.bin" # --- HDMI / DVI Mode Selection --- # ------------------------------------------ # - HDMI Mode # setenv vout "hdmi" # - DVI Mode (disables sound over HDMI as per DVI compat) setenv vout "dvi" |
Block Diagram | Physical Dimensions |