انتخاب واحد پولی:
فارسی انگلیسی
سبد خرید: (0) مورد
خوش آمدید, کاربر گرامی
پشتیبانی آنلاین
Live Support
شاخه ها
اطلاعيه ها
اطلاعيه هامرا از تغييرات محصول ماژول آمپلیفایر صدا با ارتباط بلوتوث TSA8498B(Apt-X) 4x100w آگاه كن.
سبد خريد
 
0 مورد
مقایسه محصولات
محصولی برای مقایسه انتخاب نشده است!
ورود به سيستم
آدرس پست الكترونيك:
كلمه عبور:

کلمه عبورتان را فراموش کرده اید؟
هنوز ثبت نام نکرده اید؟
تگ محصولات
تسلست
مقالات
مقالات جدید
تمامی مقالات
تمامی موضوعات
 مقالات متفرقه
RSS مقالات

ماژول آمپلیفایر صدا با ارتباط بلوتوث TSA8498B(Apt-X) 4x100w[WRL-00126]کد کالا : WRL-00126

ماژول آمپلیفایر صدا با ارتباط بلوتوث TSA8498B(Apt-X) 4x100w
قیمت: ناموجود
 
 
ماژول آمپلیفایر صدا با ارتباط بلوتوث TSA8498B(Apt-X) 4x100wماژول آمپلیفایر صدا با ارتباط بلوتوث TSA8498B(Apt-X) 4x100wماژول آمپلیفایر صدا با ارتباط بلوتوث TSA8498B(Apt-X) 4x100wماژول آمپلیفایر صدا با ارتباط بلوتوث TSA8498B(Apt-X) 4x100w

This is a 4x100W audio amplifier board with AudioB plus Bluetooth module. It's integrated 2xST high performance TDA7498 which support dual channel audio amplification. Each channel are capable of outputting nominal power simultaneously and continuously. This board can be powered by any DC14V-39V* power supply. Power input port can be power jack or screw terminal. The DC input jack is 2.5mm with positive core polarity, And if you use screw termail, Please pay attention on the polarity!

It has a smart cooling system, the fan not working in normal case to reduce the noise. Only start when the chip temperature > 65°C. Once the temperature goes down, the fan stop running.

It's perfect for your Hi-Fi application, the audio source can be RCA input or Bluetooth. Compatible with all Bluetooth devices that support media audio, including iPhone,Android. Let your smartphone paired with this board, play a music. So easy!

  • MUTE: Connect MUTE pin with GND pin. The amplifier board will into mute state.
  • STBY: Connect STBY pin with GND pin. The amplifier board will into standby state to save the power.
  • B/A: Connect B/A pin with GND pin. The bluetooth input will always be the audio source no matter the audio source selecting switch position.
     

 

Note: We had tested it. It also works well with 12VDC power. But we suggest use DC14V-39V power if possible.

 

Specification:

Following table lists all typical data of the Amp board. For full specification, please refer to the data sheet of ST’s TDA7498 chip.

TA = 25 °C, fIN = 1 kHz sine wave, RL= 6Ω, VCC = 36V. (Unless otherwise stated)

Parameter

Condition

Min

Typ

Max

Supply Voltage (v)

-

14

36

40

Quiescent Current (mA)

FAN ON,STBY Disable

-

90

-

FAN ON,STBY Enable

-

50

-

FAN OFF,STBY Disable

-

40

 

FAN OFF,STBY Enable

 

10

 

Input Sensitivity (mV)

25.6dB

-

1356

-

31.6dB

696

35.1dB

460

37.6dB

341

Input Impedance (Kohm)

-

48

60

-

Gain (dB)

GAIN0 = L, GAIN1 = L

24.6

25.6

26.6

GAIN0 = L, GAIN1 = H

30.6

31.6

32.6

GAIN0 = H, GAIN1 = L

34.1

35.1

36.1

GAIN0 = H, GAIN1 = H

36.6

37.6

38.6

Output Power (W rms)

THD = 10%

-

100

-

Efficiency (%)

Both channels output rating power.

-

>90

-

Minimum Load (ohm)

-

-

6

-

Frequency Response (dB)

±3dB

20

-

22k

Operating Temperature (℃)

-

0

20

50

 

Features:

  • Size: 15.5cm x 11cm
  • Smart cooling system
  • Bluetooth 4.0
  • External mute control port
  • External Bluetooth/LINE IN control port
  • Working voltage: DC14V-39V
  • Over/under voltage protection
  • Over current protection
  • Over temperature protection

 

Applications:

  • Personal computer
  • Background music system
  • Musical instrument amplifiers
  • Home DIY
  • Car audio

Documents:

افزودن به لیست مقایسه نظرات بازگشت
کپی‌رایت © 2024 ایران ماژول الکترونیک
راه اندازی شده توسط فروشگاه ساز ویرچو