|
|
The SAM D20 Xplained Pro evaluation kit is ideal for evaluation and prototyping with the SAM D20 Cortex™-M0+ processor-based microcontrollers. Extension boards to the SAM D20 Xplained Pro can be purchased individually. The ATSAMD20-XPRO evaluation kit does not include extension boards.
The SAM D20 Xplained Pro supports the Atmel I/O1 Xplained Pro, OLED1 Xplained Pro, and PROTO1 Xplained Pro extension boards. Contents: ATSAMD20-XPRO MCU board Key Features- SAMD20J18 microcontroller
- One mechanical reset button
- One mechanical user pushbutton — Wake-up, bootloader entry or general purpose
- One yellow user LED
- 32.768kHz crystal
- 3 Xplained Pro extension headers
- Program/debug interface for external targets
- Embedded Debugger — Auto-ID for board identification in Atmel Studio. One yellow status LED. One green board power LED. Symbolic debug of complex data types including scope information. Programming and debugging. Data Gateway Interface: SPI, I²C, 4 GPIOs. Virtual COM port (CDC).
- USB powered
- Supported with application examples in Atmel Software Framework
Related Applications for SAM D20 Xplained Pro Evaluation KitAutomotiveBuilding AutomationHome AppliancesIndustrial AutomationLightingSmart EnergyMobile Electronics
Documents for SAM D20 Xplained Pro Evaluation KitApplication NotePDFSoftwareDescription
Atmel AT04389: Connecting SAMD20E to the AT86RF233 Transceiver
(file size: 2.4MB, 9 pages, revision B, updated: 10/2013)
This application note describes a method to connect an Atmel® ATSAMD20E microcontroller to an Atmel AT86RF233 IEEE® 802.15.4 Wireless Transceiver. To translate firmware written with Atmel Studio 6 on the SAM D20J XPRO EK several layers of signal mapping such as; SERCOM port assignments, 64-pin to 32-pin conversion, header and I/O constraints, have to be reconciled. This paper outlines a solution that matches target D20E platform to the legacy D20J EK as closely as possible.
User GuidePDFSoftwareDescription
Atmel SAM D20 Xplained Pro User Guide
(file size: 3.3MB, 24 pages, revision D, updated: 04/2016)
The Atmel® SAM D20 Xplained Pro evaluation kit is a hardware platform to evaluate the ATSAMD20J18 microcontroller.
Atmel Embedded Debugger User Guide
(file size: 271KB, 11 pages, revision B, updated: 04/2014)
The Atmel® Embedded Debugger (EDBG) is an onboard debugger for integration into development kits with Atmel MCUs. In addition to programming and debugging support through Atmel Studio, the EDBG offers data streaming capabilities between the host computer and the target MCU.
|
|
|
|
|
|
|
