انتخاب واحد پولی:
فارسی انگلیسی
سبد خرید: (0) مورد
خوش آمدید, کاربر گرامی
پشتیبانی آنلاین
Live Support
شاخه ها
اطلاعيه ها
اطلاعيه هامرا از تغييرات محصول سروو موتور دیجیتال 14کیلو 300 درجه مدل CDS5500 محصول UPTECH آگاه كن.
سبد خريد
 
0 مورد
مقایسه محصولات
محصولی برای مقایسه انتخاب نشده است!
ورود به سيستم
آدرس پست الكترونيك:
كلمه عبور:

کلمه عبورتان را فراموش کرده اید؟
هنوز ثبت نام نکرده اید؟
تگ محصولات
تسلست
مقالات
مقالات جدید
تمامی مقالات
تمامی موضوعات
 مقالات متفرقه
RSS مقالات

سروو موتور دیجیتال 14کیلو 300 درجه مدل CDS5500 محصول UPTECH[ROB-00010]کد کالا : ROB-00010

سروو موتور دیجیتال 14کیلو 300 درجه مدل CDS5500 محصول UPTECH
قیمت: 2,808,000تومان1,728,000تومان
 
 

CDS5500 Robot Servo

introduction

The Uptech CDS 5500 Serial Robot Servo (Robotis Compatible) has been launched with the aim to solve most important problems caused by R/C servos in robot and simultaneously inheriting most of the advantages of them. Because of the advanced position sensor and precise A/D converter gives the high position accuracy, the position resolution in position-mode can be up to 0.3°. The response time is up to 2ms contrast a 20ms of traditional R/C servo.

The CDS series robot servo can be linked by serial bus, which can connect up to 200+ servos. Each unit can feedback its position, rotation velocity, torque, current, motor temperature and so on. The robot built with robot servos can set actions through artificial demonstration, that is, the user can regulate the robot’s joints posture with hands and the robot can record the parameters like location, speed, etc. Then, it is able to automatically play them. So there is no need to set position, velocity parameters of each joint and observe whether the joints right in place or the parameters are appropriate. You just need play and record.

It can do rotating all round, and the velocity can be controlled, just act as a gear motor. This feature enables it to work as a motor of wheeled robots, or tracked robots. The CDS series robot servo can send alarm signal via the serial bus, or shut down output in condition of over current, over temperature and so on

Specification

Max holding torque: >14 kgf.cm
Weight: 61 g
Slewing range/servo mode: 300°
Max rotate velocity: 0.18 sec/60°
Power supply: 6.5 ~ 8.4VDC
Dimensions: 40 x 20.5 x 42 mm


افزودن به لیست مقایسه نظرات بازگشت
این محصولات قبلا توسط مشتریان خریداری شده اند شما قصد خرید ندارید؟
درایور و تستر سروو موتور
درایور و تستر سروو موتور
کپی‌رایت © 2024 ایران ماژول الکترونیک
راه اندازی شده توسط فروشگاه ساز ویرچو