انتخاب واحد پولی:
فارسی انگلیسی
سبد خرید: (0) مورد
خوش آمدید, کاربر گرامی
پشتیبانی آنلاین
Live Support
شاخه ها
اطلاعيه ها
اطلاعيه هامرا از تغييرات محصول کیت کامل فرستنده و گیرنده صدا واکی تاکی فرکانس 400 تا 470 مگاهرتز توان 2 وات با SR_FRS_2W(بدون باطری) آگاه كن.
سبد خريد
 
0 مورد
مقایسه محصولات
محصولی برای مقایسه انتخاب نشده است!
ورود به سيستم
آدرس پست الكترونيك:
كلمه عبور:

کلمه عبورتان را فراموش کرده اید؟
هنوز ثبت نام نکرده اید؟
تگ محصولات
مقالات
مقالات جدید
تمامی مقالات
تمامی موضوعات
 مقالات متفرقه
RSS مقالات

کیت کامل فرستنده و گیرنده صدا واکی تاکی فرکانس 400 تا 470 مگاهرتز توان 2 وات با SR_FRS_2W(بدون باطری)[WRL-00203]کد کالا : WRL-00203

کیت کامل فرستنده و گیرنده صدا واکی تاکی فرکانس 400 تا 470 مگاهرتز توان 2 وات با SR_FRS_2W(بدون باطری)
قیمت: 400,000تومان
 
 
نظرات موجود:1
1.    Outline


FRS-DEMO-B is designed for Walkie Talkie transceiver module SR-FRS-1W and SR_FRS_0W5 demonstration, it can be used for  both UHF(400M-480M)and VHF (136M-174M);it also can be used for voice intercom and data transfer  demonstration;  it is easy to set all the module parameter via the USB interface; When select the channel, it would voice broadcast the current channel number; You may quickly evaluate our module performance by the demo board, Just make a little modify, it can be directly applied into your real production. 


2.      The Demo board performance:
1- The power switch, volume adjust , Channel selection switch 3 in 1;16 channels can be selected by the encoder switch;  
2- It is easy to switch the VOX(Sound control transmit) by a VOX switch, the VOX level can be set via the PC;
3- Voice broadcast for the channel number, Chinese/English could be selected. 
4- Monitor function by press [MON]key;
5- Voice intercom demo;
6- Data transfer demo;
7- One group user interface: SQ, LINE_IN,  LINE_OUT, PTT,  GND
8- Could restore to the factory  parameter setting
9- The demo board parameter can be set via the USB interface, for the setting instruction please contact us to get the 《SR_FRS_1W UART communication protocol》 and《SR_FRS_0W5 UART communication protocol》
  • Tx frequency, Rx frequency can be set alone;
  • Tx CTCSS, Rx CTCSS can be set alone;
  • Rf output power can be set by software;
  • Commanding setting;
  • Transmit Busy lock setting;
  • Squelch level setting
  • GBW bandwidth setting
  • MIC sensitivity setting
  • Scramble setting
  • Volume setting
  • VOX level setting
  • TOT setting(Timer of transmit)
  • Auto power save setting
  • Data transfer
  • All setting can be kept when power off

3. The demo board function define picture
1) The demo board size: 45 mm X 90 mm; 
2) DC power supply :3.3V-5V; 
3) USB type: MICRO USB; 
4) User interface:SQ, Line _in, Line_out, PTT, GND;    When use Line_in,Should push the MIC selection to  “EXT”position;
5)LED:      
Red : DC power indication;   
Yellow: Transmit status indication   
Blue:  Receive signal indication 


4. The demo board operation 
4.1     The voice intercom 
1.  Please mount the power, antenna, speaker; Push the MIC select switch to ‘INT’ position;
2.  Power on the demo board , the power indication LED(red) turns on, Then rotate the volume adjust switch to a proper position; After about 1 seconds, the demo board would voice broadcast the current channel number;
3.  Adjust the channel selection switch, ensure the transmitter and receiver are at the same channel;
4.  Hold on the [PTT] key, the transmit indication LED(yellow) turns on, You may talk to the opposite side; After finished the talking, release the [PTT] key, the system automatically into the receive statues, When received the signal from the opposite side, The receive indication LED(blue)turns on;
5.  At weak signal area, you may hold on the[MON] key, the system into monitor mode, release the [MON]key, the monitor mode is cancelled;
6.  The frequency and the CTCSS for every channel can be set alone via the USB interface;


4.2 The sound control(VOX) 
1.  Push VOX switch to ON position, the VOX function is enabled, You may talk without [PTT]key, the system will automatically into transmit status.;
2.  During the VOX valid status,The transmit indication LED(Yellow) turns on;When VOX enabled, the [PTT] key is still valid;
3.  Push VOX switch to OFF position, the VOX function is disabled, you can only intercom by press the [PTT] key;
4.  The VOX sensitivity can be set via the USB interface;


4.3   Earphone
1.   The demo board can use the earphone, The speaker, microphone, and [PTT]  key are integrated in the earphone, You may make the intercom just by operate the earphone;
2.   Please be noted that the earphone socket may not be compatible with the 3’rd party earphone;3.   If you need the earphone, please contact us;


4.4   User interface
1. The demo board provide some useful interface for the user SQ:       0: with valid receive signal; 1: without receive signal; Line_in: May connect to an external Microphone, or an external audio source;           MIC select switch” must at the “EXT” position;Line_out:The Frs module audio frequency directly output, Not via the audio amplify;PTT:     0: Transmit; 1:Receive;GND:     GND; 



4.5   Restore to the factory setting
1.  Power off;
2.  Press the [PTT] and hold on, then Power on; When the transmit indicate LED fast blink, you may release[PTT] key;
3.  When finished the system initialization,Transmit indication LED turns off,The system into the standby mode;


4.6 Data transfer/SMS transfer
1.  Connect the Demo board USB and the PC usb by MICRO USB cable;
2.  Send command:AT+DMOMES=[Length]xxxxxxxxxxxFor the detail of the command ,please refer the UART communication protocol;For how to make the data transfer please refer “


4.7 USB interface for parameter setting
USB interface for parameter setting1.  Firstly, you must install the USB driver,please download from the link: http://www.prolific.com.tw/US/ShowProduct.aspx?p_id=225&pcid=41 

NOTES: The USB 2 COM chip for this demo board is PL2303HX, it can only support the OS to WIN7, if you want support the OS to WIN8, please replace the PL2303HX with PL2303TA; 2.   Power on the demo board, Connect the demo board and the PC with the Micro USB cable. 3.  The COM port parameter setting          
Baut rate:  9600 Data:        
8parity bit:    NoneStop:       


1 4.  Demo board parameter 
setting1) When you want set the frequency for some channel, You must rotate the channel selection switch to proper channel position firstly; Here is a example for GROUP COMMAND Setting:AT+DMOSETGROUP=0,450.0500,450.2500,1,2,2,0The parameter contents are as below in turn:       0:Narrow       450.0500:Transmit frequency (MHZ)    450.2500:Receive frequency (MHZ)       


1:Receive CTCSS       
2:Squelch level       
3:Transmit CTCSS
 

       0:Rf output power :1W, Companding:OFF, Busy lock:OFF
  
The other parameter setting is same as the Group setting, Please refer 《SR_FRS_1W UART communication protocol》 and 《SR_FRS_0W5 UART communication protocol》


5.  The default parameter for demo board:


5.1 UHF(400M-480M) demo board
1.  Band width:Narrow
2.  Squelch level: 2
3.  VOX sensitivity:64.  MIC sensitivity:65.  Volume:66.  Scramble:OFF7.  Tx output power:1W (valid only for SR_FRS_1W) ;8.  Companding:OFF9.  Busy lock:OFF10.TOT(Timer of Transmit):3minutes11.The default frequency and CTCSS

ChannelTransmitfrequency(MHZ)Receive frequency(MHZ)TransmitCTCSSReceiveCTCSS
1450.0500450.050000
2450.0750450.075000
3450.1000450.100000
4450.1250450.125000
5450.1500450.150000
6450.1750450.175000
7450.2000450.200000
8450.2250450.225000
9450.2500450.250000
10450.2750450.275000
11450.3000450.300000
12450.3250450.325000
13450.3500450.350000
14450.3750450.375000
15450.4000450.400000
16450.4250450.425000



5.2  VHF(136M-174M)demo board
1.  Band width:Narrow;
2.  Squelch level: 2;
3.  VOX sensitivity:64.  MIC sensitivity:65.  Volume:66.  Scramble:OFF7.  Tx output power:1W (valid only for SR_FRS_1W) ;8.  Companding:OFF9.  Busy lock:OFF10.TOT(Timer of Transmit):3minutes11.The default frequency and CTCSS

ChannelTransmitfrequency(MHZ)Receive frequency(MHZ)TransmitCTCSSReceiveCTCSS
1150.0500150.050000
2150.0750150.075000
3150.1000150.100000
4150.1250150.125000
5150.1500150.150000
6150.1750150.175000
7150.2000150.200000
8150.2250150.225000
9150.2500150.250000
10150.2750150.275000
11150.3000150.300000
12150.3250150.325000
13150.3500150.350000
14150.3750150.375000
15150.4000150.400000
16150.4250150.425000



ChannelChina(MHZ)American(MHZ)European(MHZ)Australia(MHZ)
1409.7500462.5625446.00625476.625
2409.7625462.5875446.01875476.650
3409.7750462.6125446.03125476.675
4409.7875462.6375446.04375476.700
5409.8000462.6625446.05625476.725
6409.8125462.6875446.06875476.750
7409.8250.462.7125446.08125476.775
8409.8375467.5625446.09375476.800
9409.8500467.5875 476.825
10409.8625467.6125 476.875
11409.8750467.6375 476.900
12409.8875467.6625 476.925
13409.9000467.6875 477.000
14409.9125467.7125 477.025
15409.9250  477.050
16409.9375  477.075
17409.9500  477.100
18409.9625  477.150
19409.9750   
20409.9875   



 
افزودن به لیست مقایسه نظرات بازگشت
کپی‌رایت © 2019 ایران ماژول الکترونیک
راه اندازی شده توسط فروشگاه ساز ویرچو