انتخاب واحد پولی:
فارسی انگلیسی
سبد خرید: (0) مورد
خوش آمدید, کاربر گرامی
پشتیبانی آنلاین
Live Support
شاخه ها
اطلاعيه ها
اطلاعيه هامرا از تغييرات محصول سنسور گرد و غبار DSM501 آگاه كن.
سبد خريد
 
0 مورد
مقایسه محصولات
محصولی برای مقایسه انتخاب نشده است!
ورود به سيستم
آدرس پست الكترونيك:
كلمه عبور:

کلمه عبورتان را فراموش کرده اید؟
هنوز ثبت نام نکرده اید؟
تگ محصولات
تسلست
مقالات
مقالات جدید
تمامی مقالات
تمامی موضوعات
 مقالات متفرقه
RSS مقالات

سنسور گرد و غبار DSM501[SEN-00513]کد کالا : SEN-00513

سنسور گرد و غبار DSM501
قیمت: ناموجود
 
 
سنسور گرد و غبار DSM501سنسور گرد و غبار DSM501سنسور گرد و غبار DSM501سنسور گرد و غبار DSM501
Description:

The DSM501 Dust Sensor can senses tobacco smoke and pollen, house dust, etc., after heated it automatic enter air intake device, adjustable resistor sets the range of the dust.
Using the same as the particle counter principle as the foundation, to measure the unit volume of the absolute number of particles.

Feature:
  • Can sense tobacco smoke and pollen, house dust and so on
  • Can measure 1 micron or more of small particles
  • Small size, light weight, easy to install
  • 5V input circuit for signal processing
  • Built-in airflow generator, you can attract the external atmosphere
  • Maintenance is simple, can keep the characteristics of the sensor for a long time

Electrical parametersDSM501 module
Operating voltage rangeDC 5V ± 0.5V
Output modePWM pulse width modulation
The output voltageLow level (with particles)0.7V (max. 1.0V)
High level (clean air)4.5V (min. 4.0V)
The smallest particle measure capability1um
Sensitivity15,000 / 283ml
Operating current (Max)90mA
Humidity rangeStorage environment0-99% RH
Working environment0-95% RH
Temperature rangeStorage environment-20 °C to 80 °C
Working environment-10 °C to 60 °C
Settling timeApproximately 1 minute after the heater is switched on


DSM501A PM2.5 Dust Sensor 5V Air Measurement For Arduino
DSM501A PM2.5 Dust Sensor 5V Air Measurement For Arduino

DSM501A PM2.5 Dust Sensor 5V Air Measurement For Arduino

DSM501A PM2.5 Dust Sensor 5V Air Measurement For Arduino

Description:

1. Output pin Vout2: For the general output pin, the sensitivity has been set, the smallest particle measure capability is 1um
2. Output pin Vout1: For adjustable output pin, the sensitivity can be adjusted by the control pin, the default is 2.5 times of Vout2, that is, the smallest particle measure capacity is 2.5um
3. Control pin: Between this pin and GND adds a resistor can be adjusted Vout1 minimum particle measure level, adjust the resistance value can be adjusted Vout1 sensitivity.

ResistanceOutput pin Vout1 sensitivity
NULLDefault sensitivity (2.5um or more)
100KSemi-sensitivity (2um or more)
27KThe same as Vout1 sensitive (1um or more)

Application Note:

1. Heating capacity: Built-in a heater, heat causes rising air flow so that the outside air enter the module inside.
2. Measure of the particle type: This module is set to measure more than 1um particles, such as cigarettes, house dust, mold, pollen, spores.
3. Installation:
1) Must be mounted vertically
2) Keep away from artificial airflow, such as fans. When used with an air freshener, the front and rear sides of the fan can not be mounted. Optionally, can be mounted on one side, but the vents should be kept in the housing to ensure that external airflow can flow in.
3) Attention to avoid the installation of viscous particles, such as oil into the module, otherwise will cause failure.
4) When the module is affected by moisture will affect its normal function, it should avoid damp.
4. Lenses: Lenses need to be cleaned at intervals of about 6 months depending on environmental conditions. Wipe clean with a cotton swab dipped in water and then wipe dry. Do not use alcohol and other organic solvents to wipe.
افزودن به لیست مقایسه نظرات بازگشت
این محصولات قبلا توسط مشتریان خریداری شده اند شما قصد خرید ندارید؟
سنسور ضربان قلب
سنسور ضربان قلب
مولد بخار سرد التراسونیک 24 ولت 18 وات  با قابلیت تبخیر سرد تا 300 میلی لیتر در ساعت
مولد بخار سرد التراسونیک 24 ولت 18 وات با قابلیت تبخیر سرد تا 300 میلی لیتر در ساعت
کیت بست بلوک خنک کننده آبی
کیت بست بلوک خنک کننده آبی
فلوت سوییچ  Side Mount
فلوت سوییچ Side Mount
ماژول 5.8V  300-800ma  LED ژاپنی ضد آب Japan Rohm LED PLF6324-20DLRA-68A
ماژول 5.8V 300-800ma LED ژاپنی ضد آب Japan Rohm LED PLF6324-20DLRA-68A
صفحه هیتر سرامیکیXH-RP1570  r=2 15x70mm 5V12W~12V70W~24V280W
صفحه هیتر سرامیکیXH-RP1570 r=2 15x70mm 5V12W~12V70W~24V280W
ماژول اندازه گیری ولتاژ و جریان INA219 DC با خروجی I2C
ماژول اندازه گیری ولتاژ و جریان INA219 DC با خروجی I2C
ماژول چراغ LED کوچک USB دارای سه LED با نور سفید مهتابی
ماژول چراغ LED کوچک USB دارای سه LED با نور سفید مهتابی
بلوک خنک کننده آبی 4X12 سانت
بلوک خنک کننده آبی 4X12 سانت
ماژول سنسور جریان اثر هال ACS712ELCTR-30A مدل B
ماژول سنسور جریان اثر هال ACS712ELCTR-30A مدل B
کانکتور چرخشی/ روتاری کانکتور/ اسلیپ رینگ (Slip Ring) مدل 2A10
کانکتور چرخشی/ روتاری کانکتور/ اسلیپ رینگ (Slip Ring) مدل 2A10
بلوک خنک کننده آبی ضربدری 120x40x12mm آنودایز شده
بلوک خنک کننده آبی ضربدری 120x40x12mm آنودایز شده
سنسور فشار 0 تا 500 کیلو پاسکال مدل MPX5500DP
سنسور فشار 0 تا 500 کیلو پاسکال مدل MPX5500DP
سنسور التراسونیک HC-SR04
سنسور التراسونیک HC-SR04
بلوک خنک کننده آبی 4X4 سانت مسی
بلوک خنک کننده آبی 4X4 سانت مسی
فن هوای حلزونی 12V 0.35A 4.2W مدل Mitsumi Worm Blower TYF350LJ02
فن هوای حلزونی 12V 0.35A 4.2W مدل Mitsumi Worm Blower TYF350LJ02
ماژول فاصله سنج لیزری CJ- VL53L0X V2
ماژول فاصله سنج لیزری CJ- VL53L0X V2
سیم  جامپر 40 تایی Dupont دو سر نری 20 سانت
سیم جامپر 40 تایی Dupont دو سر نری 20 سانت
مبدل Micro HDMI به HDMI مناسب برای رسپبری پای 4
مبدل Micro HDMI به HDMI مناسب برای رسپبری پای 4
سنسور شعله UVTRON مدل R2868 محصول Hamamatsu ژاپن
سنسور شعله UVTRON مدل R2868 محصول Hamamatsu ژاپن
کپی‌رایت © 2024 ایران ماژول الکترونیک
راه اندازی شده توسط فروشگاه ساز ویرچو