انتخاب واحد پولی:
فارسی انگلیسی
سبد خرید: (0) مورد
خوش آمدید, کاربر گرامی
پشتیبانی آنلاین
Live Support
شاخه ها
اطلاعيه ها
اطلاعيه هامرا از تغييرات محصول ماژول مبدل ترموکوپل K به دیجیتال MAX6675 آگاه كن.
سبد خريد
 
0 مورد
مقایسه محصولات
محصولی برای مقایسه انتخاب نشده است!
ورود به سيستم
آدرس پست الكترونيك:
كلمه عبور:

کلمه عبورتان را فراموش کرده اید؟
هنوز ثبت نام نکرده اید؟
تگ محصولات
مقالات
مقالات جدید
تمامی مقالات
تمامی موضوعات
 مقالات متفرقه
RSS مقالات

ماژول مبدل ترموکوپل K به دیجیتال MAX6675[SEN-00302]کد کالا : SEN-00302

ماژول مبدل ترموکوپل K به دیجیتال  MAX6675
قیمت: 195,000تومان
 
 
ماژول مبدل ترموکوپل K به دیجیتال  MAX6675
Arduino module temperature sensor thermocouple type K thermocouple module MAX6675


CJMCU-MAX6675 is a complex monolithic thermocouple digital converter, the internal signal conditioning amplifier, 12-bit analog / digital converter thermocouple cold junction compensation sensor and correction, digital controller, an SPI compatible interface and an associated control logic.


CJMCU-MAX6675 has internal thermocouple signal is converted to a voltage compatible with the ADC input channel signal conditioning amplifier, T and T- inputs connected to the low noise amplifier A1, to ensure high accuracy detection input, while the connecting wires and thermocouple isolate the source of interference. Thermocouple output of thermoelectric power amplification by a low noise amplifier A1, A2 and then through the voltage follower buffer after being applied to the input of the ADC. Before converting the temperature voltage value to a temperature value equal to the price, the need for thermocouple cold junction temperature compensation, cold junction temperature is the difference between the MAX6675 ambient temperature 0 ℃ actual reference value.


Thermocouple function is to detect hot and cold ends of the temperature difference between the thermocouple hot junction temperature can be 0 ℃ -1023.75 ℃ range. That is the cold side installation CJMCU-MAX6675 board ambient temperature, the temperature is varied within the range of 20 ℃ -85 ℃. When the cold junction temperature fluctuations, MAX6675 able to accurately detect the temperature of the hot end of the change. MAX6675 is compensated for detecting and correcting ambient temperature changes by the cold end, the device can be ambient temperature detected by the temperature inside the temperature compensation diode is converted to a voltage, in order to generate the actual thermocouple temperature measurements, MAX6675 output from the thermocouple and diode detector the output voltage measurement. The device's internal circuit diode voltage and the thermocouple voltage to ADC.
افزودن به لیست مقایسه نظرات بازگشت
کپی‌رایت © 2024 ایران ماژول الکترونیک
راه اندازی شده توسط فروشگاه ساز ویرچو