شیلد ارتباط رادیویی رسپبری Raspberry Pi 802.15.4 Radio محصول Open Labs آمریکا

This module adds support for 6LoWPAN over 802.15.4 to the Raspberry Pi. With this, you can very cheaply turn a Raspberry Pi into a 6LoWPAN border router for your Internet of Things.

The module plugs directly onto pins 15-26 of the RPi's P1 header, leaving the remaining pins free for other uses.

Its intended use is to turn an RPi into a border router for a 6LoWPAN network, but it has other uses as well. You can skip the 802.15.4 and just use it as a basic 2.4GHz radio, and you can even hook it up to an Arduino if you want, or anything else with an SPI port and 4 GPIOs.

Linux recently has usable 6LoWPAN and 802.15.4 implementations, as well as a driver for this module, but this is bleeding-edge stuff so you'll want to use the wpan-next kernel as of this writing.