انتخاب واحد پولی:
فارسی انگلیسی
سبد خرید: (0) مورد
خوش آمدید, کاربر گرامی
پشتیبانی آنلاین
Live Support
شاخه ها
اطلاعيه ها
اطلاعيه هامرا از تغييرات محصول نمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبری آگاه كن.
سبد خريد
 
0 مورد
مقایسه محصولات
محصولی برای مقایسه انتخاب نشده است!
ورود به سيستم
آدرس پست الكترونيك:
كلمه عبور:

کلمه عبورتان را فراموش کرده اید؟
هنوز ثبت نام نکرده اید؟
تگ محصولات
تسلست
مقالات
مقالات جدید
تمامی مقالات
تمامی موضوعات
 مقالات متفرقه
RSS مقالات

نمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبری[LCD-00047]کد کالا : LCD-00047

نمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبری
قیمت: 2,354,000تومان
 
 
نمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبرینمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبرینمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبرینمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبری
نمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبرینمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبرینمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبرینمایشگر 4 اینچ رنگی 800x480 با تاچ مقاومتی IPS با ورودی HDMI سازگار با رسپبری
4inch HDMI LCD, 800×480, IPS

Features

  • 800×480 high resolution
  • Resistive touch control
  • IPS technology, high quality and perfect displaying from very wide viewing angle
  • Compatible and Direct-connect with any revision of Raspberry Pi (except the Pi 1 model B or Pi Zero, which requires an HDMI cable)
  • Drivers provided (works with your own Raspbian/Ubuntu directly)
  • Also works as a computer monitor, in this case, touch panel is unavailable and HDMI cable is required
  • HDMI interface for displaying, no I/Os required (however, the touch panel still needs I/Os)
  • Backlight can be turned off to lower power consumption

Photos

Interface

PIN NO.SYMBOLDESCRIPTION
1, 173.3VPower positive (3.3V power input)
2, 45VPower positive (5V power input)
3, 5, 7, 8, 10, 11, 12, 13, 15, 16, 18, 24NCNC
6, 9, 14, 20, 25GNDGround
19TP_SISPI data input of Touch Panel
21TP_SOSPI data output of Touch Panel
22TP_IRQTouch Panel interrupt, low level while the Touch Panel detects touching
23TP_SCKSPI clock of Touch Panel
26TP_CSTouch Panel chip selection, low active

External Dimension

4inch-HDMI-LCD-dimension

Development Resources

Wiki : www.waveshare.com/wiki/4inch_HDMI_LCD

FAQ

Why the LCD doesn't work with my Raspbian?
To use the LCD with the Raspberry Pi official image, driver should be installed first. Please refer to the user manual.
However, for the first testing, you may want to use our provided image directly.
Why the LCD still doesn't work with the Waveshare provided image?
Make sure the hardware connection is correct and connects fine.
Make sure the image in TF card is burnt correctly.
The PWR will keep on and the ACT will keep blinking when the Raspberry Pi starts up successfully, in case both of the two LEDs keep on, it is possible that the image was burnt incorrectly OR the TF card was in bad contact.
Which power supply should I use?
It is recommended to use a 5V/2A power adapter for the Raspberry Pi other than USB connection, otherwise the Pi may failed to start up because the PC's USB port might have not enough power.
For large size LCDs, say, 10inch diagonal or more, another stand-alone power adapter is also required to provide power to the LCD.

For more info, please check the wiki page.


PACKAGE CONTENT

Weight: 0.09 kg

  1. 4inch HDMI LCD x1
  2. HDMI to micro HDMI connector x1
  3. HDMI connector x1
  4. Stylus x1
  5. RPi screws pack (4pcs) x1

افزودن به لیست مقایسه نظرات بازگشت
کپی‌رایت © 2024 ایران ماژول الکترونیک
راه اندازی شده توسط فروشگاه ساز ویرچو