OverviewThis is a multicolor graphic LCD display, 4.3inch diagonal, 800x480 pixels. It is able to display 16,777,216 colors via the 24-bit RGB interface, supports up to 5-points capacitive touch control via I2C interface. Features- 4.3inch capacitive touch display, 800x480 resolution
- Capacitive touch panel on the I2C bus, 5-points touch control, with touch interrupt
- 24-bit RGB display interface, 16,777,216 colors, fast refreshing
- Comes with development resources and manual (examples for STM32F4 / STM32F7)
Key Parameters| LCD TYPE | IPS |
|---|
| LCD INTERFACE | 24-bit RGB |
|---|
| TOUCH SCREEN INTERFACE | I2C |
|---|
| DISPLAY COLORS | 16,777,216 |
|---|
| TOUCH CONTROLLER | GT911 |
|---|
| DISPLAY SIZE (MM) | 95.04 (W) × 53.86 (H) |
|---|
| DOT PITCH (MM) | 0.1188 (W) × 0.1122 (H) |
|---|
| BACKLIGHT | LED |
|---|
| RESOLUTION | 800 × 480 (Pixel) |
|---|
| POWER SUPPLY VOLTAGE | 5V |
|---|
| LOGIC LEVEL | 3.3V |
|---|
Interface Definition| SYMBOL | DESCRIPTION | TYPE | FUNCTION |
|---|
| 5V | Power supply | Power | 5V | | GND | Ground | GND | | 3.3V | Power supply | 3.3V | | R0~R7 | Data line | Input | Red data | | G0~G7 | Data line | Input | Green data | | B0~B7 | Data line | Input | Blue data | | CLK | LCD clock | Input | LCD clock signal | | DISP | Backlight control enable | Input | Enable/Disable backlight control | | HSYNC | Horizontal synchronization | Input | Horizontal synchronous signal input | | VSYNC | Vertical synchronization | Input | Vertical synchronous signal input | | DE | Control mode selection | Input | DE=0:SYNC mode
DE=1:DE mode | | PWM | Backlight brightness adjustment | Input | PWM signal for adjusting backlight | | GND | Ground | Power | GND | | SDA | I2C data | Output/Input | I2C data pin, read/write data | | SCL | I2C clock | Input | I2C clock pin | | RST | Reset | Input | Reset the TP controller | | IRQ | Interrupt | Output | External touch interrupt |
External Dimension Development ResourcesWiki : www.waveshare.com/wiki/4.3inch_Capacitive_Touch_LCD CompatibilityThe onboard pinheader is compatible with the following product(s) (not limited to): The onboard pinheader is compatible with and can be directly plugged into the following product(s): The RGB interface is compatible with the following product(s): - PACKAGE CONTENT
Weight: 0.105 kg - 4.3inch Capacitive Touch LCD x1
- 40-pin FFC (opposite side contact) x1
- Screws pack (4pcs) x1
|
