LCDs - LCD-00039 - 2.8" TFT Resistive Touch LCD 320X240 ILI9341

Price: $22.81

Current Reviews:1

" id="Product_Picture" style="color:#0000ff">Product Picture

Product Description

2.8-inch color screen, support 16BIT RGB 65K color display, display rich colors
240x320 resolution for clear display
Support 8-bit/16-bit parallel bus switching (the default is 16-bit), fast transfer speed
Supports ALIENTEK STM32 Mini, Elite, WarShip, Explorer, and Apollo development boards for direct plug-in use
Support for touch function
Support SD card function expansion
Provides a rich sample program for STM32 and C51 platforms
Military-grade process standards, long-term stable work
Provide underlying driver technical support

Product Parameters

Name	Parameter
Display Color	16BIT RGB 65K color
SKU	MRB2801
Screen Size	2.8(inch)
Screen Type	TFT
Driver IC	ILI9341
Resolution	320*240 (Pixel)
Module Interface	8bit or 16Bit parallel interface
Active Area	43.2x57.6 (mm)
Touch Screen Type	resistive touch screen
Touch IC	XPT2046
Module PCB Size	51.00x82.55 (mm)
Operating Temperature	-20℃~60℃
Storage Temperature	-30℃~70℃
Operating Voltage	3.3V/5V
Power Consumption	TBD
Rough Weight(Package containing)	44 (g)

Interface Definition

The red box in the above figure is the 8-bit/16-bit data bus mode switch, which is described as follows:

Solder R5 with 0Ω resistor or short circuit directly, and disconnect R4: select 16-bit data bus mode (default), use DB0~DB15 data pin

Solder R4 with 0Ω resistor or short circuit directly, and disconnect R5: select 8-bit data bus mode, use DB8~DB15 data pin

Number	Pin Label	Description
1	CS	LCD reset control pin( low level enable)
2	RS	LCD register / data selection control pin(high level: register, low level: data)
3	WR	LCD write control pin
4	RD	LCD read control pin
5	RST	LCD reset control pin( low level reset)
6	DB0	LCD data bus low 8-bit pin(When 8-bit parallel data bus mode is selected, the lower 8-bit data pins are not used)
7	DB1
8	DB2
9	DB3
10	DB4
11	DB5
12	DB6
13	DB7
14	DB8	LCD data bus high 8-bit pin
15	DB9
16	DB10
17	DB11
18	DB12
19	DB13
20	DB14
21	DB15
22	SDCS	SD card selection control pin (used when using the SD card expansion function, this test program is not used)
23	BL	LCD backlight control pin(High level light)
24	VDD	Module power positive pin (module has integrated voltage regulator IC, so the power supply can be connected to 5V or 3.3V)
25	VDD
26	GND	Module power ground pin
27	GND	Module power ground pin
28	NC	Undefined, reserved
29	MISO	Touch screen SPI bus data input pin
30	MOSI	Touch screen SPI bus data output pin
31	PEN	Touch screen interrupt detection pin(Low level when a touch occurs)
32	F_CS	Flash chip select control pin (used when using the Flash extension function, this test program is not used)
33	T_CS	Touch screen IC chip select control pin(Low level enable)
34	CLK	Touch screen SPI bus clock control pin

How to use on STM32 development board

This module is compatible with the ALIENTEK STM32 development board. The specific usage is as follows:

Step 1: Download the test program

Download the STM32 test program from the Program Download column
For a description of the relevant test procedures, please refer to the test program documentation in the package

Step 2: Connect the STM32 development board

Find the TFTLCD Slot on the development board, connect the module pins and Slot(For example, the module CS pin corresponds to the slot CS pin),

and then plug them directly into the Slot

Step 3: Compile and download the program to the development board

Compile and download the program you need to test to the STM32 development board（ Don't know how to compile and download?）

Step 4: Observe the running of the program

After the program is finished, observe the running status of the program. If it can be displayed normally, the program runs successfully.

Program Download

2.8inch 16bit Parallel-Port Module package

Product Documentation

Reference Materials

Common Software

Customers who bought this product also purchased

Graphic LCD 84x48 - Nokia 5110	USB to TTL / RS232 / RS485	MS580314BA01-50 Pressure Sensor	ESP-12E Module	0.96inch 128X64 OLED Display Module WHITE/Blue SPI

serial bluetooth HC-06	IIC / I2C 1602 LCD Module BLUE	ESP8266 WiFi Module With Trace Antenna ESP-01	1.3 inch 240x240 OLED SPI Full Color IPS Display Module	D1 mini WEMOS

50KG Half Bridge Weight Scales Sensor	Flame Sensor	Mini RS232 To TTL MAX3232 Converter Adaptor Module Serial Port Arduino	Absolut e Pressure Sensor MPS-301A	HIH-4000-003

USB2TTL USB to TTL support 3.3V 5V dual power FT232RL Arduino FTDI	MP1584EN Step-Down DC/DC Module 3A	HY0802A 0802 Character LCD White on Blue	HY0802A 0802 Character LCD White on Black	38KHz Infrared (IR) Receiver Module

"Mini DC Voltage Step-Down Regulator (Mini-360) "	10.1inch HDMI LCD (H) (with case), 1024x600	PIR Motion Detector with integrated 220v Switch	DC-DC LM2596 USB LED VOLTMETER ADJUSTABLE STEP DOWN MODULE	A4988 3D Printer Reprap Stepper Motor Driver

USB to TTL onverter PL2303TA	MG90S High Torque Standard Servo Motor	Stepper Motor Driver EasyDrive	12v Relay Module	M1 RFID Tag (13.56MHz) Key Chain

MG996R - 180° High Torque Standard Servo Motor	8 Channel 12V Relay Module	bargraph green	4-Digit 7-Segment Module with TM1637 I2C Driver	12V 10A 4 Channel Relay Board Module

Bread Board Power Supply	Dot Laser Module	Arduino Uno	150W Step-UP DC-DC Converter	Arduino Mega2560 CH340

Force Sensitive Resistor - Small	Mitsumi 6V Small Air Pump R-14 A213	0.95inch 96x64 OLED Display Module fullcolor SPI	3.2" TFT Display Shield for MEGA2560 320x480 with SD Memory Slot	3-9V 0-5A Dual USB Charging Meter USB Current Voltage Meter

4X20 Character LCD Blue I2C	NodeMcu Lua V3 WIFI Board Based on ESP8266 CP2102 Module

Iran Module Electronic
	+982166720648
	+9821
	bel_elc@yahoo.com
	www.iran-module.ir
	+982166713123
	+989391963671
Bel Electronic	No.267 - Fereshteh Passage - between Hafez.St & 30Tir.St - Jomhouri.St - Tehran - Iran
available Time	sat ~ wed - 13:00 ~ 21:00 (local time)

2.8" TFT Resistive Touch LCD 320X240 ILI9341[LCD-00039]products model : LCD-00039