|
12V Solenoid Valve - 3/4"
Description: Have you ever wanted to control the flow
of a liquid using your computer or microcontroller, but didn't know how?
Well, here's how: The 12V solenoid controlled fluid valve. Simply
connect a fluid source to the 3/4" threaded inlet and it will interrupt
the flow until 12V is applied to the fast-on connectors on the solenoid.
Note: This is not a gravity-feed solenoid. This means
that you will need enough water pressure to fully open the valve. Check
the datasheet below for exact details. It operates at a minimum of
around 3 PSI, allowing around 3 L/min of flow. Although the datasheet
shows the valve working at 220 VAC, it's actually 12 VDC. Our 350 GPH
pump does not have enough pressure for this valve. A garden hose or
other pressurized system should work just fine.
Documents:
|
|
|
|