XBee Pro 50mW RPSMA - Series 2 (ZB)
Description: This is the XBee
XBP24-BZ7PIT-004 module from Digi. The new Series 2B improves upon the
power output and data protocol of the Pro Series2. Series 2B modules
allow you to create complex mesh networks based on the XBee ZB ZigBee
mesh firmware. These modules allow a very reliable and simple
communication between microcontrollers, computers, systems, really
anything with a serial port! Point to point and multi-point networks are
supported.
Series 2B modules use a different hardware configuration from the
earlier models and while they will communicate with Series 2 XBee
modules, they are not compatible with the outdated Series 2.5 Modules.
Note: If you are looking for a simple point-to-point
configuration, you might want to try the Series 1 instead. The Series 2
requires considerable setup and configuration. We highly recommend Building Wireless Sensor Networks as a guide for setting up mesh networks.
Note: Series 1 and Series 2B XBee modules have the same pin-out. However, Series 1 modules cannot communicate with Series 2B modules.
Note: If you are using these outside of the United States, please check with your local laws regarding radio communication.
Features:
-
3.3V @ 295mA
-
250kbps Max data rate
-
50mW output (+17dBm)
-
1 mile (1600m) range
-
RPSMA connector
-
Fully FCC certified
-
6 10-bit ADC input pins
-
8 digital IO pins
-
128-bit encryption
-
Local or over-air configuration
-
AT or API command set
Documents:
|
