STM32F407VGT7[COM-00115]products model : COM-00115

The STM32F405xx and STM32F407xx family is based on the high-performance ARM^®Cortex^®-M4 32-bit RISC core operating at a frequency of up to 168 MHz. The Cortex-M4 core features a Floating point unit (FPU) single precision which supports all ARM single-precision data-processing instructions and data types. It also implements a full set of DSP instructions and a memory protection unit (MPU) which enhances application security.

The STM32F405xx and STM32F407xx family incorporates high-speed embedded memories (Flash memory up to 1 Mbyte, up to 192 Kbytes of SRAM), up to 4 Kbytes of backup SRAM, and an extensive range of enhanced I/Os and peripherals connected to two APB buses, three AHB buses and a 32-bit multi-AHB bus matrix.

All devices offer three 12-bit ADCs, two DACs, a low-power RTC, twelve general-purpose 16-bit timers including two PWM timers for motor control, two general-purpose 32-bit timers. a true random number generator (RNG). They also feature standard and advanced communication interfaces.

·         Core: ARM® 32-bit Cortex®-M4 CPU with FPU, Adaptive real-time accelerator (ART Accelerator™) allowing 0-wait state execution from Flash memory, frequency up to 168 MHz, memory protection unit, 210 DMIPS/1.25 DMIPS/MHz (Dhrystone 2.1), and DSP instructions

·         Memories

·         Up to 1 Mbyte of Flash memory

·         Up to 192+4 Kbytes of SRAM including 64-Kbyte of CCM (core coupled memory) data RAM

·         Flexible static memory controller supporting Compact Flash, SRAM, PSRAM, NOR and NAND memories

·         LCD parallel interface, 8080/6800 modes

·         Clock, reset and supply management

·         1.8 V to 3.6 V application supply and I/Os

·         POR, PDR, PVD and BOR

·         4-to-26 MHz crystal oscillator

·         Internal 16 MHz factory-trimmed RC (1% accuracy)

·         32 kHz oscillator for RTC with calibration

·         Internal 32 kHz RC with calibration

·         Sleep, Stop and Standby modes

·         V_BATsupply for RTC, 20×32 bit backup registers + optional 4 KB backup SRAM

·         3×12-bit, 2.4 MSPS A/D converters: up to 24 channels and 7.2 MSPS in triple interleaved mode

·         2×12-bit D/A converters

·         General-purpose DMA: 16-stream DMA controller with FIFOs and burst support

·         Up to 17 timers: up to twelve 16-bit and two 32-bit timers up to 168 MHz, each with up to 4 IC/OC/PWM or pulse counter and quadrature (incremental) encoder input

·         Debug mode

·         Serial wire debug (SWD) & JTAG interfaces

·         Cortex-M4 Embedded Trace Macrocell™

·         Up to 140 I/O ports with interrupt capability

·         Up to 136 fast I/Os up to 84 MHz

·         Up to 138 5 V-tolerant I/Os

·         Up to 15 communication interfaces

·         Up to 3 × I²C interfaces (SMBus/PMBus)

·         Up to 4 USARTs/2 UARTs (10.5 Mbit/s, ISO 7816 interface, LIN, IrDA, modem control)

·         Up to 3 SPIs (42 Mbits/s), 2 with muxed full-duplex I2S to achieve audio class accuracy via internal audio PLL or external clock

·         2 × CAN interfaces (2.0B Active)

·         SDIO interface

·         Advanced connectivity

·         USB 2.0 full-speed device/host/OTG controller with on-chip PHY

·         USB 2.0 high-speed/full-speed device/host/OTG controller with dedicated DMA, on-chip full-speed PHY and ULPI

·         10/100 Ethernet MAC with dedicated DMA: supports IEEE 1588v2 hardware, MII/RMII

·         8- to 14-bit parallel camera interface up to 54 Mbytes/s

·         True random number generator

·         CRC calculation unit

·         96-bit unique ID

·         RTC: subsecond accuracy, hardware calendar