TXS0108E 8-BIT BIDIRECTIONAL VOLTAGE-LEVEL TRANSLATOR FOR OPEN-DRAIN AND PUSH-PULL APPLICATIONS
FEATURES
on A Port and on B Port (VCCA VCCB) VCC Isolation Feature If Either
VCC Input Is at GND, All Outputs Are in the High-Impedance State
Latch-Up Performance Exceeds 100 mA Per JESD 78, Class II ESD Protection
Exceeds JESD 22 (A Port) 2000-V Human-Body Model 150-V Machine
Model 1000-V Charged-Device Model (C101) IEC 61000-4-2 ESD (B Port)
±8-kV Contact Discharge ±6-kV Air-Gap Discharge
This 8-bit noninverting translator uses two separate configurable
power-supply rails. The A port is designed to track VCCA. VCCA accepts
any supply voltage from 3.6 V. The B port is designed to track VCCB.
VCCB accepts any supply voltage from 5.5 V. This allows for low-voltage
bidirectional translation between any of the 2.5-V, 3.3-V, and 5-V
voltage nodes. When the output-enable (OE) input is low, all outputs are
placed in the high-impedance state. To ensure the high-impedance state
during power up or power down, OE should be tied to GND through a
pulldown resistor; the minimum value of the resistor is determined by
the current-sourcing capability of the driver.
Please be aware that an important notice concerning availability,
standard warranty, and use in critical applications of Texas Instruments
semiconductor products and disclaimers thereto appears at the end of
this data sheet.
PRODUCTION DATA information is current as of publication date.
Products conform to specifications per the terms of the Texas
Instruments standard warranty. Production processing does not
necessarily include testing of all parameters.
ORDERABLE PART NUMBER Reel of 1000 Reel of 2000 Reel TXS0108EPWR TXS0108EZXYR
Package drawings, thermal data, and symbolization are available at
www.ti.com/packaging. For the most current package and ordering
information, see the Package Option Addendum at the end of this
document, or see the TI website at www.ti.com.
Submit Documentation Feedback Product Folder Link(s): TXS0108E
over operating free-air temperature range (unless otherwise noted)
MIN VCCA VCCB VI VO IIK IOK IO Tstg (2) (3) Supply voltage range
Supply voltage range Input voltage range (2) Voltage range applied to
any output in the high-impedance or power-off state (2) Voltage range
applied to any output in the high or low state (2) (3) Input clamp
current Output clamp current Continuous output current Continuous
current through VCCA, VCCB, or GND Storage temperature range 65 A port B
port A port B port A port B port 0 VO MAX VCCA + 0.5 VCCB UNIT mA °C
Stresses beyond those listed under "absolute maximum ratings" may
cause permanent damage to the device. These are stress ratings only, and
functional operation of the device at these or any other conditions
beyond those indicated under "recommended operating conditions" is not
implied. Exposure to absolute-maximum-rated conditions for extended
periods may affect device reliability. The input and output
negative-voltage ratings may be exceeded if the input and output current
ratings are observed. The value of VCCA and VCCB are provided in the
recommended operating conditions table.
UNIT PW package (1) JA Package thermal impedance RGY package (2) ZXY
package (1) (2) The package thermal impedance is calculated in
accordance with JESD 51-5. The package thermal impedance is calculated
in accordance with JESD 51-7. 70 TBD 47 °C/W